Engine Cleaning Solution Interior Liqui Moly Pro-Line 1l

Internal engine cleaning solution Liqui Moly Pro-Line 1l Cleans the engine internally. Removes deposits from oil passages, bearings, the area of the rings, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle reliability. After an oil change, allows for maximum efficiency of the newly introduced oil. Properties - extremely economical - Cleans quickly while protecting the engine at the same time - suitable for diesel particulate filters - tested for turbochargers and catalysts - easy to use - environmentally friendly - does not attack rubber parts - quick cleaning Technical data Color / appearance                        yellow-brown Base                                          additive in carrier liquid Density at 20 ° C                    0.81 g / cm³              DIN 51757 Boiling point                       63 ° C                       DIN ISO 2592 Pour point                      -45 ° C                      DIN ISO 3016 Format                                       liquid Viscosity at 40 ° C                 <7 mm² / s Odor                                         characteristic Field of use Cleaning and washing of gasoline systems and diesel engines. Improves hydraulic function, e.g. VVT, VANOS and other oil switches and valves. Can be safely used in vehicles with timing belts in oil baths. Application A dose of 500 ml is sufficient for a maximum of 5 liters of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product, let the engine run at idle for approx. 10 - 15 minutes depending on the degree of contamination. Then change the oil and filter. ProLine Engine Flush is compatible with most commercially available engine oils. Note: Not suitable for use on motorcycles with wet clutches.