Liqui Moly Ceramic Paste 50g

Liqui Moly Ceramic Paste 50g

Partially synthetic, white paste for high temperatures. Prevents adhesion, cold welding, seizing due to rust, and vibration due to friction. Contains no metals. Very good protection against wear and corrosion. Universal use. Resistant to hot and cold water, as well as acids and bases. Operating temperature range: between – 40 °C and + 1,400 °C.

Properties

- resistant to organic and alkaline acids

- prevents slipping

- good water resistance

- prevents cold seizure

- does not attack common sealing materials

- prevents brake noise

- high load capacity

- non-toxic

Technical Data

Color / appearance                                   white

Base                                                     synthetic/mineral oil

Thickening agent                               inorganic thickening agents, solid white lubricants

Density                                              1.42 g/cm³

Operating temperature range 

                   as separating paste         -40 to +1400 °C 

Penetration at rest 40°C                    approx. 340

Base oil viscosity                            approx. 100 mm²/s

4-ball test - material load              3800/4000 N            DIN 51 350,4

Friction number - wire                                0.10                         DIN 946

Pressure resistance (anti-slip)  0.08 LFW-4

SRV - Friction number                            0.10-0.13 µm          coefficient of friction

Field of Use 

For lubricating all heavily stressed sliding surfaces. Especially at low speeds and oscillating movements. Separation of thermally stressed components. Protection against corrosion on screws, pins, bolts, flanges, shafts, and passage elements.

Application Method 

Before treatment, parts must be cleaned of residues, dirt, and moisture. Apply to cleaned surfaces using a brush, a paintbrush, or a lint-free cloth. The amount depends on the area of use and application.