Liqui Moly Pro-Line Engine Cleaning Solution Interior 500ml

Engine Cleaning Solution Liqui Moly Pro-Line 500ml
Cleans the engine from the inside. Removes deposits from oil passages, bearings, piston rings area, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle reliability. After an oil change, it allows for maximum efficiency of the newly introduced oil.

Properties
- extremely economical
- Cleans quickly while being gentle on the engine
- suitable for diesel particulate filters
- tested for turbochargers and catalysts
- easy to use
- environmentally friendly
- does not attack rubber parts
- quick cleaning

Technical data
Color / appearance brownish yellow
Base additive in carrier liquid
Density at 20 °C 0.81 g/cm³ DIN 51757
Boiling point 63 °C DIN ISO 2592
Pour point -45 °C DIN ISO 3016
Format liquid
Viscosity at 40 °C <7 mm²/s
Odor characteristic

Field of application
Cleaning and washing gasoline systems and diesel engines. Improves hydraulic function, e.g. VVT, VANOS, and other oil switches and valves. Can be safely used in vehicles with a timing belt in the oil bath.

Application
One 500 ml dose is sufficient for a maximum of 5 liters of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product, let the engine idle for approx. 10 - 15 minutes depending on the degree of contamination. Then change the oil and filter. ProLine Engine Flush is compatible with most commercially available engine oils.
Note: Not suitable for use on motorcycles with wet clutches.