Liqui Moly Motorbike Radiator Cleaning Solution 150ml

Liqui Moly Motorbike Radiator Cleaning Solution 150ml Concentrate for cleaning cooling circuits. Deposits in the cooling/heating system form barriers to heat exchange, block thermostat valves, and adjustment mechanisms. Excessively high engine temperatures cause inefficient engine operation, increase wear, and the risk of damage. It removes oil and limescale deposits, ensures optimal engine temperature, and safety in operation. It does not contain aggressive acids or bases. Properties - disperses sludge - removes oil and grease-based contaminants - compatible with antifreezes - chemical conversion of lime - neutralizes acids - neutral behavior in contact with rubber and plastics Technical characteristics: Form                                      liquid Color:                                   white, slightly cloudy Density at  20 °C                  1.05   g/cm³ Hazard class:           none pH value                               ~8.7 Solubility in water                    miscible Field of application:  Suitable for all cooling circuits. Compatible with all conventional additives and antifreezes Usage instructions: LIQUI MOLY recommends adding the Liqui Moly Radiator Cleaning Solution if problems arise or before changing the coolant. Depending on the level of contamination, run the engine at operating temperature for 10-30 minutes. Drain the cleaning product and flush the cooling system with water. Fill the cooling system according to the manufacturer's specifications. The contents of the dose are sufficient for 5 liters of coolant.