Nanolex Si3D Ceramic Protection 30ml

Protectie Ceramica Nanolex Si3D 30ml

Protectie Ceramica Nanolex Si3D is a protection specially designed to meet the highest requirements and needs of customers. The Si3D molecules are precursors of ceramic and hybrid materials. These molecules are composed of silicon, nitrogen, and hydrogen, as well as organic compounds such as carbon. These extremely strong polymers have a low viscosity and do not contain solvents. Nanolex Si3D also contains a thermoplastic component used additionally to form a strong hydrophobic flexible layer. This product offers resistance to weather conditions, as well as anti-corrosive protection and protection against chemical solutions (active foams, etc.). Nanolex Si3D can increase the overall hardness of the lacquer layer up to 9H, adding a transparent and shiny layer while deepening the color of the surface. Depending on the number of layers of product applied, the final thickness may vary. The number of layers applied, together with the sophisticated three-dimensional structure of the Si3D matrix, makes the lacquer layer resistant to the chemicals used in car washes, as well as resistant to abrasion.

However, the benefits shared by Nanolex Si3D do not end with remarkable levels of protection and durability. Perhaps even more importantly, treated surfaces become shinier (Si3D offers improvement in color appearance and depth), more resistant (due to the hardness of the silicon-based matrix), and hydrophobic (water will not stay on the treated surface). This last feature is not just for contact with water but also for quicker cleaning of dirt (Lotus effect).

Unlike classic protections (wax, sealant) where the protective layer disappears over time or with the use of aggressive cleaning substances, the protection offered by Nanolex Si3D provides remarkable durability and insensitivity to the abrasion created by frequent washes and the use of strong alkaline substances or acid detergents.

Number of applied layers: 1 layer (minimum), 3 layers (sufficient)
Durability: approx 30,000 km
Drying time (maturity): 90% in the first 24 hours, 10% in the first week after application

Tested and produced in Germany.