Ceramic Protection CSL Crystal Serum Light Gtechniq 50ml

Ceramic Protection CSL Crystal Serum Light Gtechniq 50ml

Why Use Gtechniq Crystal Serum Light?

Ceramic Protection CSL Crystal Serum Light Gtechniq forms a transparent and ultra-durable ceramic layer with a hardness of 9H. Once applied, the level of shine will remain at a higher level for a longer period compared to traditional paint protection products. Additionally, cleaning the vehicle will be much easier due to the high level of contaminant rejection.

The formed ceramic layer is very dense and resistant to both alkaline and acidic chemicals (pH2 – pH12). This feature makes tree sap, bitumen, or water spots easy to remove.

Ceramic Protection CSL Crystal Serum Light Gtechniq is the easier-to-apply version of the famous CSU Crystal Serum Ultra – a ceramic protection that, if not applied correctly, can only be removed by sanding with P1500 abrasive and a lot of work (it can only be applied by Gtechniq accredited detailing workshops). Crystal Serum Light offers 80% of the performance of Crystal Serum Ultra. When it comes to shine, hologram resistance, contaminant and dirt rejection, Gtechniq CSL and CSU are at the forefront of paint protection.

Simple Steps to Help You Achieve the Best Results

• To apply Crystal Serum Light (CSL), ensure that the vehicle is indoors and can stay indoors for 12 hours after application; do not apply in direct sunlight.
• Apply the product only at a temperature between 5°C and 25°C.
• Shake well and wear gloves.
• Wash and decontaminate the paint thoroughly before application. If necessary, polish your paint, either with a machine or by hand, to remove any imperfections.
• Spray the panel onto a Gtechniq MF1 microfiber cloth and wipe each panel in small sections.
• Soak the applicator pad with 3 full measures of CSL from the dropper and work the liquid into the pad for even saturation.
• Replace the bottle cap and set it aside – do not hold the bottle in hand as this promotes premature curing.
• Apply in overlapping motions over an area of approximately 2ft by 2ft (60cm x 60cm).
• Immediately remove residues with an MF1 cloth – it may be necessary to polish the same area multiple times, but avoid doing so with too much force. We recommend using 2 cloths at the same time. Ensure that the cloths are rotated during residue removal to prevent CSL from curing in the cloth.
• Inspect the surface for residues with a bright, diffuse light source.
• If you have removed the residue and it cures completely, you should polish the area and apply CSL again.
• As soon as you finish, place the MF1 cloths in water, wash them, and dry them as soon as possible.
• Wait at least 1 hour after applying CSL before applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal.
• Store in a cool, dry place.
• If opened, use within 3 months; if unopened, use within 12 months.