Pavilion antenna, 4Cars, 40 cm 5 mm, 12 V, 3 m cable

Antena pavilion, 4Cars, 40 cm 5 mm, 12 V, cablu 3 m

Car roof antenna, black, 40 cm, 5 mm, designed for receiving radio signals in passenger cars. Allow an expert to perform the installation.

Instructions:

1.  Decide where you want to run the coaxial cable and remove the plastic covers and upholstery from the car.
2.  Pull the jumper from the back of the car to the receiver.
3.  Put back the covers and upholstery.
4.  There is an opening for the car antenna on the roof of the vehicle. Place the antenna in this opening and screw it in tightly. If there is no such opening, you need to drill one in a suitable place.
5.  Connect the jumper to the antenna.
6.  Connect the antenna to the receiver by inserting the jumper connector. The free conductor should be connected to a 12 V onboard voltage.