Engine Cleaning Solution Liqui Moly Motorbike Motor Flush Shooter 80ml

Liqui Moly Motorbike Motor Flush Shooter 80ml engine cleaning solution Cleaning agent for removing troublesome deposits from inside the engine. Removes components that promote the accumulation of sludge or the formation of impurity films. Soluble or insoluble residues in oil are suspended and removed from the oil circuit during the oil change. The engine cleaned of deposits and impurities and the fresh oil, free from old residues, can thus showcase its performance without hindrance. Properties - cleanliness and care - easy to use - does not attack common sealing materials - restores the engine to its original performance - long engine life - extremely economical - tested for use with catalytic converters Technical characteristics: Color                                               cloudy yellow Form                                                 liquid Base                                                   concentrated additive/carrier substance Viscosity at 40°C                          24.12 mm²/s Flash point                             61 °C Pour point                               - 45 °C Odor                                                   characteristic Density at 20°C                                0.805 g/cm³ Field of application: Cleans and washes the oil circuits of motorcycles with 4-stroke gasoline engines. The frequency of use depends on the degree of contamination of the oil circuit and the quality of the oil used. Mode of use: One 80 ml dose is sufficient for 1-2 liters of oil. Add Motor Flush Shooter to the engine oil at operating temperature before changing the oil. After adding the product, let the engine idle for approximately 10 minutes. Then change the oil and filter. Motor Flush Shooter is compatible with all commercially available motor oils. Suitable for use on motorcycles with wet clutches.