PPF Application Gel ADBL PPF Gel 1L
ADBL PPF Gel is a professional water-based gel designed for the application and installation of PPF (Paint Protection Film) on complex surfaces such as mirrors, curved elements, spoilers, or glossy screens. The formula with sliding agents reduces the risk of adhesive peeling and allows for precise positioning of the film, even in difficult areas.
The product can be diluted up to a ratio of 1:3, depending on the installation technique and the level of control required. It rinses off easily and does not leave residues.
Controlled and precise application: Facilitates the positioning of the film on curved or extruded elements.
Water-based formula (99%): Safe for sensitive surfaces, including glossy black finishes and screens.
Optimized adhesion: Reduces the risk of adhesive peeling during film positioning.
Improved sliding: Ensures smooth movement under the PPF for fine adjustments.
High versatility: Can also be used to prevent the leakage of impurities from under seals.
Clean and degrease the surface using ADBL Surface Cleaner.
Remove dust and dirt from the work area.
Apply the gel both on the surface and on the adhesive side of the film.
Position the film on the desired element and adjust until correctly aligned.
Smooth the film with a squeegee, removing the gel and air bubbles.
Wipe off excess with a clean microfiber cloth.
Brand: ADBL
Product Type: Gel for PPF installation
Quantity: 1L
Base: 99% water
Recommended Dilution: up to 1:3 (depending on the installation method)
Compatibility: PPF films, complex exterior elements, glossy black surfaces, screens
Usage: Professional (detailing, protective film installation)
Use only on clean and properly degreased surfaces.
Do not allow the product to dry between films.
Store at room temperature, away from freezing.
ADBL PPF Gel ensures a quick, controlled, and clean application of PPF film, making it the right choice for detailers and installers who seek efficiency and accuracy in every project.