Carbon X Pro-X Particle Filter Cleaning Solution 11 KG

Cleaning solution for Carbon X Pro-X particle filter 11 KG

PARTICLE FILTER CLEANING SOLUTION

CARBON X is a concentrated product for cleaning particle filters, intake manifolds, and intercoolers. The advanced formula penetrates, emulsifies, and quickly removes carbon deposits, soot, and burnt residues from surfaces.

HOW TO USE: The concentrated solution should be diluted beforehand with warm water (40-50°C) in a ratio of 1:1-1:5, depending on the degree of deposits to be removed. For cleaning the particle filter by immersion/filling, let the solution act for 1-2 hours, after which remove the remaining deposits with a high-pressure water or air jet, in the opposite direction of the gas flow. For cleaning other washable contaminated surfaces, spray the product in the dilution mentioned above and let it act for 3-5 minutes, during which you can agitate with a brush, after which rinse with a water jet (recommended 60-80 bar). Repeat the process if necessary. Check the compatibility of the product with the surfaces to be cleaned.

STORAGE: In the original sealed container, in places protected from frost and direct sunlight. For additional recommendations, contact your local distributor.