Diesel Additive Antifreeze Liqui Moly 1l

Diesel Antifreeze Additive Fließ-Fit K Liqui Moly

This product controls the growth of paraffin crystals caused by cold. It significantly improves the filtration properties and the cold filter plugging point (CFPP) of diesel fuel.

The efficiency of the flow improver depends on the type of paraffin and the paraffin content of the medium distillate. Depending on the quality of the diesel, the quality of the cold filter plugging point (CFPP) can be improved by up to -10 °C.

Properties

- improves filter properties

- good response behavior

- easy to use

- suitable for all diesel fuels (summer and winter diesel grades)

- self-mixing

- ensures optimal operation in winter, which would otherwise be affected by cold

Technical characteristics:

Color                                     light, clear

Density at 15 °C                    0.841 g/cm³ 

Viscosity at 40 °C              <7 mm²/s

Flash point:           63 °C

Dosage                                        1 to 1000; corresponds to 0.1%

Improvement of filterability         by up to -10°C, depending on the quality of the diesel

Odor                                        characteristic

Form                                       liquid

Field of application:

Suitable for all Diesel engines, with or without Diesel particulate filter - especially for remedying problems. Turbo tested.

Optimal efficiency is ensured only by adding it to the fuel tank before gelling (around 0 °C). Perfectly compatible with all conventional Diesel fuels and heating oils with bio components of max. 20%. 1 l is sufficient for 1,000 l of

fuel (dosage 1:1000).

Usage instructions

To achieve maximum efficiency, it is essential to add the additive at a diesel temperature of about 5ºC before crystallization, to avoid paraffin separation. Paraffin crystals that have already formed in the tank cannot be broken down by subsequently adding Diesel Fließ-Fit K.

Note: Sensitive to frost; therefore, store above 0 °C!