Set of 2 D2S Plug and Play LEDs, Canbus, 6000k, 70W, 8000 Lm, 12-24V

Set of 2 D2S Plug and Play LED lights, Canbus, 6000k, 70W, 8000 Lm, 12-24V

Set of 2 D2S Plug and Play LED lights for car headlights 70W Cree Chip 8000 Lm 12-24V provides an efficient and modern solution for replacing the Xenon bulbs in your car. These LEDs are easy to install in a Plug & Play manner, requiring no modifications or additional adaptations, connecting directly to the existing ballast of the vehicle.

Features:

• Power: 70W (per set)
• Power supply voltage: 12-24V
• Material: Aluminum for efficient heat dissipation
• Color temperature: 6000K (cool white light)
• Socket: D2S
• Brightness: 8000 lumens (per set)
• CAN-BUS (Error Free): Yes (no burnt bulb error on the dashboard)

Installation Instructions:

1. Turn off the power: Ensure the vehicle is turned off and the headlights are off.
2. Remove Xenon bulbs: Take out the existing Xenon bulbs from the headlights.
3. Connection: Connect the D2S LEDs to the power socket of the Xenon bulbs and install them in the headlights.
4. Testing: Turn on the headlights and check the functionality of the LEDs, as well as any errors on the dashboard (none should appear due to the CAN-BUS function).

Attention!

• The product is not approved for use on public roads. It is intended solely for off-road use, such as racing or automotive events.

Recommendation:

It is recommended to have the installation done at an authorized service to ensure correct installation and to avoid any errors.

The price is for a set (2 pieces).