Medium polish paste one step Ewocar 2in1 One Cut 1L

Medium polish paste one step Ewocar 2in1 One Cut 1L

The medium 2 in 1, one step, Ewocar 2in1 One Cut paste is designed to safely remove defects and light to moderate scratches, as well as traces left from sanding with abrasives up to P2000, including holograms.

Its unique finishing formula is capable of removing swirls (holograms) and medium scratches, leaving an extremely deep shine and an impeccable finish on paint in a single step.

To achieve maximum shine, we recommend using One Cut together with a medium sponge like the Ewocar Red Medium Pad. After the polishing stage, simply wipe the polished area with a clean Ewocar microfiber cloth in a circular motion. Always use a clean cloth to prevent scratching the freshly polished surface, and if you are still not satisfied with the results, you can repeat the process until the desired finish is achieved.

If you want to increase the correction power of the 2in1 One Cut paste, combine it with a medium sponge.

It does not contain silicone or filler particles, and works perfectly with both dual-action DA orbital polishers and rotary machines.

Being water-based means it has a low dust content technology inside, allowing for longer polishing and buffing cycles. For the orbital machine, we recommend working at speeds from 3 to 5, and for rotary machines, stay within the range of 800-1200 RPM.

Since it does not contain silicones or fillers, after using the paste, you can safely and effectively apply any ceramic protection or sealant you desire with lasting results.