Spray paint for rims Matte Black 600ml

Mat Black Rim Spray 600ml

Nitro-acrylic paint for decorating rims and wheel covers (cars, motorcycles, bicycles). Suitable for restoring, decorating, and protecting against wear. Can be used in both outdoor and indoor environments. Main surfaces: metal, aluminum, ABS, PVC.

Color: satin black

INSTRUCTIONS: The optimal usage temperature is 20 - 25° C. Before use, shake the container for a few minutes, spray from a distance of approximately 18 - 25 cm from the painted surface, holding it vertically. For an even application of the product, it is recommended to shake the bottle occasionally during use. Apply thin and crossed layers, first vertically and then horizontally.

Surface drying time: 15 – 20 minutes. Deep drying time: 24 – 36 hours, depending on the thickness of the layer.

RECOMMENDATIONS: At low temperatures, warm the bottle in warm water to a temperature of 20 - 25° C. Do not use other heat sources such as flames, radiators, fireplaces, stoves, sunlight, heated surfaces, etc. Do not apply in excessively humid environments or at temperatures below 15° C. Remove paint with solvent.

The surface to be painted must be dry and clean, free from grease or rust. The number of recommended layers depends on the absorption rate of the painted surfaces. A higher absorption rate requires more layers. For metal surfaces, it is recommended to pre-coat with a layer of Brilliante Primer Spray.